Perfect for those high traffic surfaces such as table tops, our non-yellowing water-based wipe on sealer, easily applied with a damp lint free cloth and dries to a matte finish.
Shake gently before use. If applying to a recently painted surface, allow 12-24 hours of drying time before applying. For best results, use with a damp lint free rag and apply two coats 2-4 hours apart. In humid areas, longer drying times may be required.
Good to know: 500ml covers about 75 sq.ft (7m2). Always test your methods and process to ensure best results. Clean up is easy with soap and warm water.
Tip: Be sure to gently mix your Tough Coat™ prior to using it as the matting agent andother ingredients may settle to the bottom. Do not shake vigorously as thiswill cause air bubbles in your piece that are difficult to remove once applied.
Fusion also offers an Antiquing Tough Coat™ so that you can add that vintage look AND added protection all in one step!
Our antiquing glaze is lightly tinted to a rich brown for the perfect antiquing look and soft matte finish.
With an exceptional ease of application with a long open time, our Antiquing Glaze delivers the performance of a professional finish that everyone can achieve!
Apply sparingly with a quality brush of your choice and then wipe back with lint free cloth to achieve desired effect.
Allow the glaze to dry 12-24 hours, depending on the climate/weather/humidity prior to applying our Tough Coat for extra durability.
Tough Coat is recommended for high traffic areas such as kitchen cabinets, table tops etc.
New to the collection, our clear glaze allows you to create your own finish.
Simply mix in a few drops of the desired colour or metallic to create a custom glaze.
If adding tint or paint, test to ensure your desired pigmentation is achieved prior to application.
Spread glaze onto surface and use a lint free cloth to wipe back the glaze into crevices.
Allow to dry completely- typically 24-48 hours depending on humidity.
Tough Coat is recommended for high traffic areas.
500ml bottle with the Fusion label.
Our Beeswax Finish consists of a premium blend of natural beeswax and food grade hemp oil, all natural and food safe! Perfect for wooden cutting boards!
Fusion Beeswax Finish can be used as a sealant over Fusion Mineral Paint, Milk Paint or raw timber for a super smooth look and feel.
• Food Safe • No Chemicals • NO VOC’s • Biodegradeable
Apply as needed. For super easy application, melt in microwave with lid off for 20 seconds.
Curing: 30 days to fully cure
Copyright © - Refinished - All Rights Reserved 2017 - Web Design and Maintenance by Onespot Web Integration