Ultra Grip & Concealer

Ultra Grip

Ultra Grip allows for Fusion™ to adhere to surfaces that are typically not for painting such as a lacquered surface, laminate, metal or glass.

This water based emulsion increases the adhesion of Fusion™ colours to glossy, hard to grip surfaces. Milky when wet, dries translucent with very good clarity. Test your methods and product combinations prior to applying in order to ensure desired effects.

For optimum adhesion, clean the surface to be painted with Sugar Soap and sand lightly to roughen the surface.

To use:  Apply one coat. Allow to dry for 12 hours before applying subsequent coats of Fusion™ colours. Clean up with water.



Colour Blocker is a high quality acrylic tinted with 100% recycled waste pigment. 
It’s a neutral light grey, and since each batch is unique, tints will vary with production.

Use Colour Blocker as a primer to change the colour easily while saving on the paint and the environment.

Shake well before applying. Allow 2-4 hours to dry between coats.